|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
DATA SHEET www..com LTE052T-061 Active matrix 5" colour TFT LCD module Preliminary specification 21 January 1999 Philips Flat Panel Display Co. (Philips FPD) B.V. Preliminary specification Active matrix 5" colour TFT LCD module CONTENTS 1 2 3 4 4.1 5 5.1 5.2 6 6.1 6.2 6.3 7 7.1 7.2 7.3 7.4 7.5 7.5.1 7.5.2 7.6 7.6.1 7.7 7.8 8 8.1 8.2 8.3 8.4 8.5 9 9.1 9.2 9.3 9.4 9.5 10 GENERAL DESCRIPTION FEATURES APPLICATIONS QUICK REFERENCE DATA Block diagram MECHANICAL DATA Dimensions Electrical connectors PINNING Module interface Backlight Inverter ELECTRICAL CHARACTERISTICS Limiting values Recommended operating conditions - module Recommended operating conditions - inverter Characteristics Input and output timing Displayed lines (PAL mode) Displayed lines (NTSC mode) External clock Sync inputs Backlight dimming Power-on/off sequences OPTICAL DATA Optical characteristics Pixel organization Contrast ratio Response time Viewing angle ENVIRONMENTAL DATA Environmental tests Mechanical tests Electrostatic discharge (ESD) Electromagnetic compatibility (EMC) Safety DEFINITIONS LTE052T-061 www..com LIFE SUPPORT APPLICATIONS These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Flat Panel Display Co. (Philips FPD) B.V. customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Flat Panel Display Co. (Philips FPD) B.V. for any damages resulting from such improper use or sale. 21 January 1999 2 Philips Flat Panel Display Co. (Philips FPD) B.V. Preliminary specification Active matrix 5" colour TFT LCD module 1 GENERAL DESCRIPTION 3 APPLICATIONS LTE052T-061 www..com This is an active matrix LCD module which comprises: * A 5" colour TFT panel * Panel driver electronics * Integrated backlight * Integrated interface card * Separate 1 : 30 inverter. The 5" active area has full colour capability using 320 (3 x RGB) x 234 pixels. The panel has a 4 : 3 aspect ratio and a wide viewing angle. The module can withstand intense environments. Outline dimensions compatible with double-DIN size for automotive use. 2 FEATURES * Car navigation * TV and VCR monitors * Video games * Automation and process-control monitors. 4 QUICK REFERENCE DATA PARAMETER Overall dimensions (without inverter): width height depth Active area dimensions: width height Display resolution Pixel dimensions: horizontal vertical Pixel configuration Supply voltage (module) Power consumption (with inverter) Dimming ratio Luminance Backlight life at 25 C; Ilamp = 6 mA (RMS); continuous operation Typical viewing angle (contrast ratio >5): horizontal right horizontal left vertical up vertical down Maximum operating ambient temperature Operating panel surface temperature range Storage temperature range Typical response time: rise time fall time Mass of the module 30 15 183 10 ms ms g 70 70 50 -70 65 deg deg deg deg C 3 x 0.107 0.319 RGB stripe 8 to 16 6.2 1 : 30 350 min. 8000 cd/m2 hours V W mm mm 102.72 74.76 320 x 234 mm mm pixels 126.8 89.6 13.0 mm mm mm VALUE UNIT * RGB stripe configuration * Two analog RGB with HS and VS inputs * Two analog RGB channels with possibility of picture-in-picture * (C)VBS for synchronization or HS, VS with CLK signal * Selectable NTSC/PAL (RGB) * Up/down and left/right control signals * Display aspect ratio: 4 : 3 * Display resolution: 234 lines * High-contrast TFT LCD drive system * High-speed response * High-brightness luminance * Wide viewing angle * Integrated high-efficiency backlight * Extended temperature range * Dimming ratio: 1 : 30. -30 to +85 C -40 to +90 C 21 January 1999 3 4.1 STANDBY Vinv GND 2 INVERTER 1 Vout GNDout 2 3 4 5 1 Vrmt Vctl GND 21 January 1999 Block diagram DIMMING INTERFACE BOARD BACKLIGHT internal power supplies SOURCE DRIVER MODULE VDD 8 to 16 V SWITCHED-MODE POWER SUPPLY 10 Philips Flat Panel Display Co. (Philips FPD) B.V. GND 20 +5 V ADJUST R G B LOGIC CONTROLLER GATE DRIVER LCD SIGNAL INTERFACE Active matrix 5" colour TFT LCD module 4 SYNC GENERATOR COMMON BUFFER R1 G1 B1 GND R2 G2 B2 13 14 15 16 17 18 19 INPUT SELECTION LCD PANEL 960 x 234 (C)VBS BRT 11 12 HS VS P/N HRV VRV VSW CLKC 1 2 4 5 6 7 21 ESD PROTECTION CONTROL CLK 22 PWM 3 INPUT CONNECTOR CCB542 Preliminary specification LTE052T-061 www..com Fig.1 Block diagram. Philips Flat Panel Display Co. (Philips FPD) B.V. Preliminary specification Active matrix 5" colour TFT LCD module 5 MECHANICAL DATA 126.8 107.4 13 handbook, full pagewidth LTE052T-061 www..com 4.5 1.8 89.6 79.8 74.8 33.0 4.5 16.5 ,,,,,,,,, ,,,,,,,,, ,,,,,,,,, ,,,,,,,,, ,,,,,,,,, ,,,,,,,,, 63.4 27.4 22.9 18.4 13.9 120.4 102.7 42.4 CCB543 80 5 23.1 30.4 61.2 11 32.2 10.2 position 1 55.9 60.2 Dimensions in mm. Fig.2 Mechanical outline. 21 January 1999 5 Philips Flat Panel Display Co. (Philips FPD) B.V. Preliminary specification Active matrix 5" colour TFT LCD module 5.1 Dimensions PARAMETER Display format Active area Screen size (diagonal) Pixel pitch: horizontal vertical Dot configuration Overall dimensions (excluding connectors and inverter): width height depth Mass of the module 5.2 Electrical connectors SERVICE Interface Inverter input Inverter output Backlight NUMBER OF PINS 22 5 2 2 126.8 0.3 89.6 0.3 13.0 0.3 183 10 3 x 0.107 0.319 RGB stripe VALUE (320 x 3) x 234 102.72 x 74.76 127 5.0 LTE052T-061 www..com UNIT dots mm mm inches mm mm mm mm mm g MATING CONNECTOR 22-pin flex foil (1 mm pitch) Molex 51021-0500 or equivalent JST BHR-03VS-1 or equivalent JST SM02(8.0)B-BHS-1-TB 21 January 1999 6 Philips Flat Panel Display Co. (Philips FPD) B.V. Preliminary specification Active matrix 5" colour TFT LCD module 6 6.1 PINNING Module interface SYMBOL HS VS PWM P/N HRV VRV VSW n.c. n.c. VDD VBS BRT R1 G1 B1 n.c. R2 G2 B2 GND CLKC CLK Notes 1. CLKC = LOW: module is activated by CLK, HS and VS. 2. CLKC = HIGH: HS is output, synchronized to VBS signal CLKC = LOW: HS is horizontal sync input. 3. CLKC = HIGH: VS is output, synchronized to VBS signal CLKC = LOW: VS is vertical sync input. 4. HRV = HIGH: image is normal HRV = LOW: image is reversed in horizontal direction. 5. VRV = HIGH: image is normal VRV = LOW: image is reversed in vertical direction. 6. VSW = HIGH: RGB1 is selected VSW = LOW: RBG2 is selected. 7. CLKC = HIGH: HS and VS become output mode CLKC = LOW: CLK, HS and VS become input mode. PIN 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 I/O I/O I/O O I I I I - - I I I I I I - I I I I I I DESCRIPTION horizontal sync; notes 1 and 2 vertical sync; notes 1 and 3 synchronization signal for backlight PAL/NTSC control signal horizontal scanning direction; note 4 vertical scanning direction; note 5 RGB1/RGB2 video signal switching; note 6 not connected not connected supply voltage VBS input for sync separator brightness control red video signal 1 green video signal 1 blue video signal 1 not connected red video signal 2 green video signal 2 blue video signal 2 ground LTE052T-061 www..com change I/O direction of CLK, HS and VS; note 7 clock signal 21 January 1999 7 Philips Flat Panel Display Co. (Philips FPD) B.V. Preliminary specification Active matrix 5" colour TFT LCD module 6.2 Backlight SYMBOL Vin GND 6.3 Inverter SYMBOL PIN DESCRIPTION PIN 1 2 backlight input voltage backlight and inverter ground connection DESCRIPTION LTE052T-061 www..com Input connector CN1 Vinv GND Vrmt Vctl GND CN1-1 CN1-2 CN1-3 CN1-4 CN1-5 inverter input voltage (8 to 16 V) ground (0 V) standby control voltage TTL-compatible input; HIGH = ON dimming control voltage (adjust from 0 V for full dimming to 5.0 V for no dimming) ground Output connector CN2 Vout GNDout CN2-1 CN2-2 inverter output voltage output ground 21 January 1999 8 Philips Flat Panel Display Co. (Philips FPD) B.V. Preliminary specification Active matrix 5" colour TFT LCD module 7 ELECTRICAL CHARACTERISTICS LTE052T-061 www..com 7.1 Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Tamb = 25 C; GND = 0 V; unless otherwise stated. SYMBOL VDD VI(analog) VI(dig) VO(dig) RH DESCRIPTION power supply voltage (pin 10) analog input voltage (peak-to-peak value) digital input voltage digital output voltage relative humidity; note 1: Tamb 60 C Tamb = 60 to 90 C Tstg Tamb Toper Notes 1. No condensation is allowed under any condition. 2. Operating panel surface temperature range only assures panel driving. 7.2 Recommended operating conditions - module DESCRIPTION power supply; note 1 analog input voltage; note 2: AC component (peak-to-peak value) AC component video content (peak-to-peak value); note 3 DC component VI(d) BRT fH digital input voltage; note 4 brightness control VBS horizontal sync frequency; note 5: NTSC PAL tW(H) VBS horizontal sync pulse width; note 5: NTSC PAL tr(H), tf(H) fV VBS horizontal sync pulse rise and fall times; note 5 vertical sync frequency; note 4: NTSC PAL CLKC = HIGH CLKC = HIGH fH/284 fH/344 fH/262 fH/312 fH/258 fH/304 Hz Hz CLKC = HIGH 4.2 4.2 - 4.7 4.7 - 5.2 5.2 0.5 s s s CLKC = HIGH 15.13 15.03 15.73 15.63 16.33 16.23 kHz kHz 0.7 - -1.0 0 0 1.0 0.7 0 - - 2.0 - +1.0 5.2 5.0 V V V V V CONDITIONS MIN. 7.8 TYP. 12.0 MAX. 16.0 UNIT V storage temperature; note 1 operating ambient temperature operating panel surface temperature; note 2 - - -40 -30 -30 90 85 +90 +65 +85 % % C C C MIN. -0.3 -0.3 -0.3 -0.3 20 5 5 5.3 MAX. V V V V UNIT SYMBOL VDD VI(a) 21 January 1999 9 Philips Flat Panel Display Co. (Philips FPD) B.V. Preliminary specification Active matrix 5" colour TFT LCD module LTE052T-061 www..com SYMBOL tW(V) NTSC PAL tr(V), tf(V) fclk tWH tWL tr(clk) tf(clk) fHS tW(HS) tr(HS), tf(HS) fVSR tW(VSR) tSU1 tHO1 tSU2 tHO2 Notes DESCRIPTION vertical sync pulse width; note 4: CONDITIONS CLKC = HIGH - - CLKC = HIGH or LOW CLKC = LOW CLKC = LOW CLKC = LOW CLKC = LOW CLKC = LOW CLKC = LOW CLKC = LOW CLKC = LOW CLKC = LOW CLKC = LOW CLKC = LOW CLKC = LOW CLKC = LOW CLKC = LOW - MIN. TYP. 3H 2.5H - 6.8 - - - - fclk/435 5 - fH/262 3H - - - - - - MAX. UNIT s s s MHz ns ns ns ns kHz s s Hz s ns ns s s vertical sync pulse rise and fall times; note 4 input clock frequency input clock pulse width HIGH input clock pulse width LOW input clock rise time input clock fall time HS input frequency HS input pulse width HS input pulse rise and fall times VSR input frequency VSR input pulse width VS to HS set-up time VS to HS hold time CLK to HS set-up time CLK to HS hold time 0.5 7.6 - - 10 10 fclk/405 9 0.05 fH/258 5H - - - - 6.0 20 20 - - fclk/465 1 - 50 1H 25 25 1.0 1.0 1. The module does not have load dump, under or overvoltage protection. 2. Applies to VBS input. 3. Applies to VR1, VG1, VB1, VR2, VG2 and VB2. 4. Applies to HS, NTP, VS, HRV, CLKC, CLK and VSW. 5. Applies to HS. 7.3 Recommended operating conditions - inverter Tamb = -30 to +85 C; relative humidity <90%. SYMBOL Vctl Vrmt Vin Pout Rout Notes 1. Adjust from 0 V for full dimming to 5.0 V for no dimming. 2. Inverter OFF: Vrmt = 0 Vrmt < 1.3 V (logic LOW). Inverter ON: Vrmt = 1.6 < Vrmt 5.0 V (logic HIGH). DESCRIPTION dimming control DC voltage standby voltage input voltage output power output load CONDITIONS note 1 note 2 8.0 t.b.f. t.b.f. 0 MIN. - 12.0 3.5 100 TYP. TTL-compatible 16.0 t.b.f. t.b.f. V W k MAX. 5.0 UNIT V 21 January 1999 10 Philips Flat Panel Display Co. (Philips FPD) B.V. Preliminary specification Active matrix 5" colour TFT LCD module 7.4 Characteristics GND = 0 V; Tamb = -30 to +65 C; unless otherwise stated. SYMBOL CLK, HS, VS VIH VIL VIH VIL HIGH-level input voltage LOW-level input voltage 3.5 - - - - - - - - - - - - - - DESCRIPTION CONDITIONS MIN. TYP. LTE052T-061 www..com MAX. UNIT - 1.5 - 0.8 - 0.4 V V CLKC, NTP, VRV HIGH-level input voltage LOW-level input voltage IOH = -4 mA IOL = +4 mA IOL = +4 mA VI = +5 V VI = 0 2.0 - V V CLK, HS, VS, PWM VOH VOL CLK (note 1) VOL IIH IIL LOW-level output voltage - -0.1 - - - - - - - - 0.4 V A A A A A A HIGH-level output voltage LOW-level output voltage 2.4 - V V CLK, HRV, VSW HIGH-level input current LOW-level input current +0.1 -4.5 CLKC, HS, VS, NTP, VRV IIH IIL VSW IIH IIL HIGH-level input current LOW-level input current VI = +5 V VI = 0 +10 -600 - - - HIGH-level input current LOW-level input current VI = +5 V VI = 0 +10 -200 R1, G1, B1, R2, G2, B2, VSW, VBS CI input capacitance f = 1 MHz 28 pF CLK, HS, VS, NTP, HRV, VRV, PWM CI CLKC CI Note 1. At CLKC = HIGH, CLK = 0. input capacitance 10 nF input capacitance f = 1 MHz 37 pF 21 January 1999 11 Philips Flat Panel Display Co. (Philips FPD) B.V. Preliminary specification Active matrix 5" colour TFT LCD module 7.5 Input and output timing DESCRIPTION field period: NTSC PAL Tline line period: NTSC PAL fline line frequency: NTSC PAL tDV1 tDV2 tVO tVID td(disp) VS delay field 1 VS delay field 2 vertical pulse width video signal on-display time sync edge to start display delay time: NTSC PAL td(HS) tW(H) 7.5.1 sync edge to HS delay time horizontal pulse width DISPLAYED LINES (PAL MODE) 50% level 50% level 7.5.2 - - - - - - - - - - - - ffield = 60 Hz ffield = 50 Hz - - CONDITIONS MIN. LTE052T-061 www..com SYMBOL Tfield TYP. 16.67 20.0 63.5 64.0 15.73 1H H/2 4H 50.1 10.6 11.1 1.4 1.2 MAX. - - - - - - - - - - - - - UNIT ms ms s s kHz kHz 15.625 - s s s s s DISPLAYED LINES (NTSC MODE) Field 1 displayed line numbers: 27 to 298. Field 2 displayed line numbers: 339 to 611. In PAL, on average, every seventh line is skipped. Actual lines skipped in Field 1: 34 + 14N where N = 0, 1, to 18 and 40 + 14M where M = 0, 1, to 18. Actual lines skipped in Field 2: 344 + 14N where N = 0, 1, to 18 and 350 + 14M where M = 0, 1, to 18. Field 1 displayed line numbers: 23 to 256. Field 2 displayed line numbers: 286 to 519. 21 January 1999 12 Philips Flat Panel Display Co. (Philips FPD) B.V. Preliminary specification Active matrix 5" colour TFT LCD module LTE052T-061 www..com FIELD 1 line number: NTSC handbook, full pagewidth PAL 3 625 4 1 5 2 6 3 7 4 8 5 9 6 10 7 11 8 VBS tDV1 tVO VS HS FIELD 2 line number: NTSC PAL VBS 265 312 266 313 267 314 268 315 269 316 270 317 271 318 272 319 273 320 tDV2 VS HS HS tHO VBS tpd 1H(1) CCB632 (1) NTSC: 1H = 63.5 s (typ.). PAL: 1H = 64 s (typ.). Fig.3 Input and output signals. 21 January 1999 13 Philips Flat Panel Display Co. (Philips FPD) B.V. Preliminary specification Active matrix 5" colour TFT LCD module 7.6 External clock LTE052T-061 www..com tW(VI) handbook, full pagewidth VS 262 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 line number HS VS tHO1 tSU1 tW(HI) HS CLK tHO2 tSU2 HS CCB344 Fig.4 Definition of line and pixel numbers. 7.6.1 SYNC INPUTS With the composite sync signal CS, the module will function correctly with signal sources such as video recorders. The external horizontal and vertical pulses should have no disturbances for a stable picture. Composite sync timing is according to CCIR. 21 January 1999 14 Philips Flat Panel Display Co. (Philips FPD) B.V. Preliminary specification Active matrix 5" colour TFT LCD module 7.7 Backlight dimming LTE052T-061 www..com Backlight dimming should be used only with standard PAL and NTSC signals (see Fig.5). For non-standard signals there is also a PWM signal but it is not synchronized. handbook, full pagewidth VS PWM NTSC 105H 525H PWM PAL 89H 625H HS 1H 1/2H 1/2H PWM CCB345 Fig.5 Generated PWM signal for PAL and NTSC. 7.8 Power-on/off sequences Power supply reset: If the power supply voltage VDD drops below 7.8 V, the module switches off. The module can be restarted with VDD < 0.5 V for a minimum of 250 ms followed by VDD rising above 7.8 V within 200 ms. Recommended sequence for power-on: 1. Switch on the video source. 2. Switch on the power supply (maximum supply voltage rise time = 200 ms). 3. Switch on the backlight. Recommended sequence for power-off: 1. Switch off the backlight. 2. Switch off the power supply (minimum time to power-off = 250 ms). 3. Switch off the video source. 21 January 1999 15 Philips Flat Panel Display Co. (Philips FPD) B.V. Preliminary specification Active matrix 5" colour TFT LCD module 8 OPTICAL DATA LTE052T-061 www..com 8.1 Optical characteristics Tamb = +22 3 C; elapsed time from switch-on is greater than 15 minutes; driving conditions are typical values; unless otherwise specified. Measurements are made perpendicular to the panel; unless otherwise specified. SYMBOL L CRmax DR PARAMETER luminance maximum contrast ratio dimming ratio viewing angle: = horizontal right = horizontal left = vertical up = vertical down tres average response time colour coordinates: xW yW xR yR xG yG xB yB opt Notes 1. Brightness control input (BRT) open circuit. 2. No dimming. 3. Customer is advised to use the display in the 12 o'clock direction. white white red red green green blue blue optimum viewing angle = 270 (6 o'clock); notes 1 and 3 rise time fall time peak white; note 2 0.260 0.257 0.526 0.289 0.263 0.445 0.101 0.067 - 0.310 0.307 0.576 0.339 0.313 0.495 0.151 0.117 5 0.360 0.357 0.626 0.389 0.363 0.545 0.201 0.167 - deg CR > 5; note 1 60 60 45 45 - - 70 70 50 70 30 15 - - - - - - deg deg deg deg ms ms CONDITIONS VI(RMS) = 6.0 mA; note 1 at optimum viewing angle; note 1 MIN. 300 100 : 1 - TYP. 350 150 : 1 1 : 30 - - - MAX. UNIT Cd/m2 21 January 1999 16 Philips Flat Panel Display Co. (Philips FPD) B.V. Preliminary specification Active matrix 5" colour TFT LCD module 8.2 Pixel organization 8.3 LTE052T-061 Contrast ratio www..com handbook, halfpage RGBRGBRGB RGBRGBRGB RGBRGBRGB CCA227 The contrast ratio (CR) is the ratio between the transmission () in a full white area (R = G = B = 1) and the transmission (d) in a dark area (R = G = B = 0): CR = ---d 8.4 Response time Fig.6 Dot organization. Response time (tres) is the mean of rise time (tr) and fall time (tf): handbook, 4 columns P 1,1 P1,2 P2,2 P1,3 P1,318 P1,319 P2,319 P1,320 P2,320 P3,320 P2,1 P3,1 tr + tf t res = -----------2 Rise time is the time for luminance to change from 10% to 90% as a result of a change of electrical condition, fall time is the time for luminance to change from 90% to 10% as a result of a change of electrical condition. P232,1 P233,1 P234,1 P233,2 P234,2 P234,3 P232,320 P233,319 P233,320 P234,318 P234,319 P234,320 CCB024 The pixels are square and are arranged in vertical stripes of red green and blue. The pixel information is provided sequentially, row-by-row. P1,1 is the upper-left pixel of the display, P234,320 is the bottom-right pixel. Fig.7 Pixel organization. 8.5 Viewing angle handbook, full pagewidth viewing direction 12 o'clock direction 90 9 o'clock direction 180 3 o'clock direction 0 CCB580 6 o'clock direction 270 = declination. = azimuth. Fig.8 Viewing angle. 21 January 1999 17 Philips Flat Panel Display Co. (Philips FPD) B.V. Preliminary specification Active matrix 5" colour TFT LCD module 9 ENVIRONMENTAL DATA LTE052T-061 www..com 9.1 Environmental tests Measurements are performed after two hours in room temperature environment; unless otherwise specified. TEST High temperature, operating Low temperature, operating High temperature storage Low temperature storage High temperature, high humidity, operating Thermal shock 9.2 Mechanical tests TEST Shock CONDITIONS 3 directions: X, Y, Z axes; 6 repeats; peak acceleration = 100 G; pulse duration = 6 ms 3 directions: X, Y, Z axes; 6 repeats; sweep time = 11 minutes; peak acceleration = 10 G; frequency = 10 to 150 Hz; amplitude = 1.5 mm peak-to-peak METHOD IEC 60068-2-27Ea REMARK not operated; not packed CONDITIONS Tpanel = +85 C for 240 hours Tamb = -30 C for 240 hours Tamb = +90 C for 240 hours Tamb = -40 C for 240 hours Tamb = +60 C, RH = 90% for 240 hours Tamb = -40 to +85 C; 10 cycles METHOD IEC 60068-2-2Bb IEC 60068-2-1Ab IEC 60068-2-2Bb IEC 60068-2-1Ab IEC 60068-2-3Ca module not operating module not operating module operating REMARK panel surface temperature IEC 60068-2-14Nb module not operating Vibration IEC 60068-2-6Fc not operated; not packed 9.3 Electrostatic discharge (ESD) Under directive "89/336/EEG" conforms with "EN50082-1". 9.4 Electromagnetic compatibility (EMC) Complies with "FCC part 15". Under directive "89/336/EEG" conforms with "EN55022/B" and "EN61000-4-6". 9.5 Safety Complies with "IEC 60950" and "UL1950". 21 January 1999 18 Philips Flat Panel Display Co. (Philips FPD) B.V. Preliminary specification Active matrix 5" colour TFT LCD module 10 DEFINITIONS Data sheet status Objective specification Preliminary specification Product specification Limiting values LTE052T-061 www..com This data sheet contains target or goal specifications for product development. This data sheet contains preliminary data; supplementary data may be published later. This data sheet contains final product specifications. Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information Where application information is given, it is advisory and does not form part of the specification. 21 January 1999 19 PHILIPS FLAT PANEL DISPLAY COMPANY SALES OFFICES Philips Flat Panel Display Co. (Philips FPD) B.V. Marketing & Sales Department Building WAY-2 Professor Holstlaan 4 5656 AA EINDHOVEN The Netherlands Tel: +31 40 274 2292 Fax: +31 40 274 2220 www..com Offices Europe France, Suresnes Tel: +33 1 40 99 6161 Fax: +33 1 40 99 6541 Italy, Milano Tel: +39 2 67 52 2458 Fax: +39 2 67 52 2430 Philips Components Flat Panel Display Group 3200 N. 1st Street San Jose, CA 95134 USA Tel: +1 408 570 5681 Fax: +1 408 570 5881 Offices USA East Coast, Boston Tel: +1 603 898 1196 Fax: +1 603 898 4319 Central, MSP Tel: +1 612 683 9088 Fax: +1 612 683 9189 Philips Singapore Pte Ltd. 620A Lorong 1 Toa Payoh SINGAPORE 319762 Tel: +65 350 2000 Fax: +65 252 3068 Philips Taiwan Ltd. 6F, 96, Sec. 1 Chien Kuo N. Road P.O. Box 22978 TAIPEI, Taiwan, R.O.C. Tel: +886 2 2134 2905 Fax: +886 2 2134 2930 Philips Electronics Korea Ltd. 260-199, Itaewon - Dong Yongsan - Ku C.P.O. Box 3680 SEOUL, Korea Tel: +82 2 709 1485 Fax: +82 2 709 1480 FPD05 (c) Philips Flat Panel Display Co. (Philips FPD) B.V. 1999 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Printed in The Netherlands 4322 252 32730 |
Price & Availability of LTE052T-061 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |